Save representation as JPG, GIF or BMP

Print representation

Fit view (zoom all geometry to visible region)

Viewing direction in positive or negative (<ñ>) x-axis direction

Viewing direction in positive or negative (<ñ>) y-axis direction

Viewing direction in positive or negative (<ñ>) z-axis direction

Reset view (default position)

Load view from file

Save current view to file

Switch coordinate system on/off

Switch scale system on/off

Set background color

A uniform rotation of the impeller around the z axis can be generated, whereby the velocity can be influenced by the track bar.

Select resolution of curves and surfaces (affects display and STL export only

Coarse

Middle

Fine

Set points and curves properties

Show only one blade

Switch Blade to blade section on/off

The display of an approximately perpendicularly flown through area between the hub and the shroud and two neighboring blades can be generated for the component currently selected in the model tree. In case the checkbox Fix to minimum is activated, the 3D-display of this area is shifted to the location of the minimum cross section. Otherwise, it can be slided to any reasonable position within the blade to blade channel with the help of the track bar Position.

By pressing the button Show progression a window is opened, in which the value of the cross section is displayed in dependence on the meridional position (0=leading edge, 1=trailing edge). The location of the actual 3D-display as well as that of the minimum cross section is marked with special symbols.